Before Purchasing
Important:Please make sure that your smart key fob looks identical and matches any of the part numbers or FCC IDs listed below. Contact Us with your VIN if you don’t have an existing remote for comparison.
Specifications
Part Numbers: 10269729 and 10178734
FCC ID: AB00702T
Buttons:
Frequency:
Remote Programming:
Battery: (included)
Programming Procedure #195
The entire programming procedure must be completed within 30 seconds of grounding VAC reprogramming connector (step 2). If the procedure is not completed then start over at step 1.
- Turn the ignition to ON.
- Look in the trunk beneath the rear shelf between where the speakers are mounted. Ground the green single wire VAC connector located at the keyless entry receiver module (see diagram).
- Wait for door locks to lock and unlock by themselves indicating you have entered programming mode.
- Press UNLOCK on remote 1 twice (pause one second between presses.
- Wait for door locks to lock and unlock by themselves.
- Repeat step 4 and 5 for remote 2.
- Remove ground wire from green connector.






































Reviews
There are no reviews yet.