1993 Infiniti J30 Remote FCC ID: A269ZUA073, 28268-49U10

Important:Please make sure that your smart key fob looks identical and matches any of the part numbers or FCC IDs listed below. Contact Us with your VIN if you don’t have an existing remote for comparison.

Part Numbers: 28268-49U10, 28268-F9900, 28268-F9902, 28268-49U05, 28268-C9920, 28268-C9901 , 28268-C9907 , and 28268-79901

FCC ID: A269ZUA073

Buttons:

Frequency:

Remote Programming:

Battery: (included)

IMPORTANT: Before entering programming mode, have in possession all of the transmitters you will be using on the vehicle. Once you program the transmitter, all previous codes will be erased from the memory. The other transmitters will not be functional until you program the transmitters again.

1. Open the trunk.
2. Close and lock all doors with power door lock on the driver’s door.
3. Insert key in ignition and remove it 6 times within 10 seconds. Make sure you withdraw the key completely each time. If you do it too fast the vehicle will not enter programming mode.
4. Manually unlock and lock the driver door once with the manual knob.
5. Within 5 seconds push the LOCK button on the remote.
6. If there are any other remotes you wish to program including your old ones then repeat step 4 and 5 for each remote. You may program up to 4 remotes.
7. Unlock driver’s door with manual lock knob, open driver’s door and close it.