2007 Mazda 3 Remote KPU41794

Important:Please make sure that your smart key fob looks identical and matches any of the part numbers or FCC IDs listed below. Contact Us with your VIN if you don’t have an existing remote for comparison.

Part Numbers: BAN6-675RY and 4238A-41525

FCC ID: KPU41794

Buttons:

Frequency:

Remote Programming:

Battery: (included)

1. Remove key from ignition
2. Close all doors.
3. Open driver’s door. Perform steps 4-6 within 24 seconds.
4. Turn ignition switch ON and back to LOCK position three times
5. Close and open driver’s door three times
6. Door locks should lock and unlock automatically (if they do not wait 40 seconds and repeat procedure starting at step 1.)
7. Press UNLOCK button of each keyless remote to be programmed twice, door locks should lock and unlock after each remote is programmed. (If door locks do not lock and unlock proceed as follows: Close and open driver’s door once, door should lock and unlock twice. If door locks do not lock and unlock, go back to step 3.)
8. Exit vehicle and test remote(s)